 |
|
|
|
|
|
| RadioMetrix |
|
| The BiM2 transceiver is
an enhanced replacement for our original BiM. It offers
greater transmit power, higher data rates, greatly improved
receiver interference rejection and a lower profile.The
module is ideal for enabling bi-directional wireless connectivity
in battery powered or hand held applications.
|
|
|
|
| |
Features
|
|
| |
- CE Certified by independent Notified
Body according to the R&TTE Directive (1999/5/EC).
- Verified to comply with Radio standard
ETSI EN 300 220-3 by UKAS accredited Test Laboratory.
- Verified to comply with EMC standard
ETSI EN 301 489-3 by UKAS accredited Test Laboratory.
- Usable range to 200 metres external,
50 metres in building.
- Data rates up to160kbit/s.
- SAW controlled 10mW FM transmitter.
- Double conversion FM superhet receiver.
- SAW front end filter and full screening.
- Plug in replacement for Radiometrix
BiM-433-30.
- 3V or 5Volt supply at < 20mA.
|
|
| |
The BiM2 is a half duplex
radio transceiver module for use in high-speed bi-directional
data transfer applications at ranges up to 200metres. The module
operates on the European licence exempt frequency of 433.92MHz.
The small footprint of 23 x 33mm and low profile of 4mm together
with low power requirements of <20mA @ 3 to 5 Volts enable
convenient PCB installation. The high raw data rate capability
of 64kbps and fast state change times will support high data
throughput of up to 3 kbyte/s in 'streaming' applications or
alternatively allows very short air time utilization in multi-node
scanning networks.
|
|
| |
Applications
|
|
| |
- PDA’s, organizers and laptops.
- Handheld terminals.
- EPOS equipment, barcode scanners,
belt clip printers.
- Data loggers.
- Audience response systems.
- In Building environmental monitoring
and control.
- High end security and fire alarms.
- Restaurant ordering systems.
- Vehicle data up/download.
|
|
| |
If you would like any
more information regarding the Radio Module, please refer to
the RadioMetrix web-site by clicking
here. |
|
| |
|
|
